(B-1) General Contractor
(Commercial)
Apply for the License
Arizona Registrar of Contractors
1700 W. Washington St, Suite 105
Phoenix, AZ 85007
Phone: (877) 692-9762
Exam Provider
PSI Services LLC
3210 E. Tropicana Ave
Las Vegas, NV 89121
Phone: (855) 744-0310
Exam Type
OPEN BOOK
Exam Content
| Subject Areas | # of
Questions |
|---|
| Sitework | 12 |
| Concrete | 14 |
| Masonry | 10 |
| Metals | 12 |
| Carpentry | 10 |
| Thermal & Moisture Protection | 8 |
| Doors & Windows | 7 |
| Finishes | 6 |
| Safety | 12 |
| General Building Code | 9 |
Total number of test questions:
100
Time allowed (minutes):
240
In addition to the trade-specific examination, you must take the
Arizona Statutes & Rules Training Course & Exam
Books Allowed in the Exam
1.
Code of Federal Regulations, 29 CFR Part 1926 (OSHA), GPO [or] (OSHA) Selections by PSI, 2013
2.
International Building Code, 2018, ICC
3.
ACI 318-08 or 318-14: Building Code Requirements for Structural Concrete and Commentary, 2008 or 2014, ACI
4.
ACI 560-08 or 530-13: Building Code Requirements for Masonry Structures, 2008 or 2013, ACI
Books NOT Permitted in the Exam
1.
Carpentry and Building Construction, 2010 or 2016 (Student Edition), John Feirer, and Mark Feirer
2.
Design and Control of Concrete Mixtures, 16th Edition, 2016, Kosmatka, Kerkhoff, Panarese
3.
Pipe and Excavation Contracting, 2011, Dave Roberts
4.
Gypsum Construction Handbook, 7th Edition, 2014, USG
5.
Modern Masonry: Brick, Block, Stone, 8th Edition, 2015, Clois Kicklighter
6.
Placing Reinforcing Bars, 9th Edition, 2011, CRSI
7.
PDCA Craftsman's Manual and Textbook, 8th Edition, 1995, PDCA
8.
NRCA Roofing Manual: Membrane Roofing Systems, 2007 or 2015, NRCA
9.
NRCA Roofing Manual: Steep-Slope Roof Systems,2009 or 2017, NRCA
10.
Handling and Erection of Steel Joists and Joist Girders, Technical Digest No. 9, 3rd Edition, 2008 (2006 Edition out-of-print), Steel Joist Institute
11.
SDI Manual of Construction with Steel Deck, 2006 or 2016, SDI
Available Study Materials
PSI OSHA Selections
Study Guide
$54.95
Sample questions are based on the PSI publication titled “29 CFR PART 1926 Selections, as of June 2013” (highlighted in green above).
This file contains approx. 800 sample questions.
REMINDER: PSI uses this book for many exams they offer. Not all sections of this code will apply to your exam.
We also include a table showing the relationship between our questions and OSHA code sections. Corrections to the original PSI publication are noted.
